192.168.0.1 Router Login Password

192.168.0.1 – 192.168.o1 Router Login Password

If you are into networking or using Routers, then you knew that these networking devices and modems are using default IP address, which is 192.168.0.1 or https://192.16801.

192.168.0.1 is a private IP Address that is used by router companies to setup Admin Panel of the Router such as NETGEAR, TP-Link, D-Link.

192.168.0.1 is a default router IP address for all routers. As we all know, each device connected to the Internet has its IP address. This IP address is public and private. The IP address 192.168.0.1 is private IP, which is the default IP address for routers of the D-Link and Netgear models.

If you can’t remember your username and password, you can take advantage of the default login information offered on the World Wide Web. When it works, you should be asked to enter your password. Next, you need to enter a username and password. Choose a mix of letters and numbers to create a strong password.

192.168.0.1 Router IP address

The router must be configured. Before you begin to obtain the key, you may need to connect it to the routers or modem using an Ethernet cable. You will need an IP address to connect to the router, which can be 192.168.1.1, http://192.168.0.1, 192.168.1. 254, etc. Now, if you don’t know the router’s default IP address, check its shipping box or contact the manufacturer.

But in most cases, the default IP address for modems and routers is 192.168.0.1. Now you also need to enter the default username and password to access its administration page. The default username and password are different for a different manufacturer. Here we will share all possible default username and password for the IP address 192.168.01.

There are many other options; you will find in your routers like Change Mac Address, Change Router Connection IP Address and Password and Block Websites. 192.168.1.x to 192.168.1.54 is a list of private IP addresses allocated to network devices.

Router Default Username, Password and default IP address

Router ManufacturerIP addressUser NamePassword
TP-Link192.168.0.254adminadmin/password
192.168.0.1
D-link192.168.0.1adminadmin
192.168.0.30
Linksys192.168.0.1adminadmin
Netgear192.168.0.1adminadmin
Netgear192.168.0.1adminpassword

Router models that use 192.168.0.1 as their default IP

TP-LINK Archer A7
Wireless Router
Default username: admin
Default password: admin

D-Link DIR-819 rev A1
wireless router
Default username: admin
Default password: (blank)

Ruckus Wireless ZoneFlex 7962
access point
Default username: super
Default password: sp-admin

Ruckus Wireless ZoneFlex 7441
access point
Default username: super
Default password: sp-admin

Ruckus Wireless ZoneFlex 7055
access point
Default username: admin or super
Default password: sp-admin

Ruckus Wireless ZoneFlex 7321
access point
Default username: super
Default password: sp-admin

Ruckus Wireless ZoneFlex 7372
access point
Default username: super
Default password: sp-admin

Ruckus Wireless ZoneFlex 7363
access point
Default username: super
Default password: sp-admin

Ruckus Wireless ZoneFlex 7352
access point
Default username: super
Default password: sp-admin

Virgin Media Super Hub 1
cable modem, wireless router
Default username: admin
Default password: randomly generated

How to Access TP-Link Router using 192.168.0.1

To access the router’s administration panel, you must connect it to your PC with an RJ45 cable. Once connected, open the browser and type http://192.168.0.1 in the address bar.

TP-Link Router using 192.168.0.1
TP-Link Router using 192.168.0.1

Now a small window will appear asking for the user name and password. If you do not know the user name and password, you cannot log into the router. Enter the username and password and you’re done. You can see the home page of the router where you can see some options for wireless settings and advanced settings.

How to login to ASUS wireless router

Step 1: Connect PC and ASUS Router.

Step 2: Launch web browser > type 192.168.0.1 in the address bar > Enter.

Step 3: Enter the default username and password (admin/admin).

Asus Router Login 192.168.0.1
Asus Router Login 192.168.0.1

Step 4: Change WiFi Password and Router Username.

Netgear Router Login 192.168.0.1

Netgear Router has a default IP address with 192.168.0.1. All you need to do is connect Router and PC with a cable.

Enter IP address 192.168.0.1 > Enter username and password listed in the above table.

Netgear Router Login 192.168.0.1
Netgear Router Login 192.168.0.1

Go to Wireless Settings and change settings that you want.

How to Reset Router with 192.168.0.1 IP address

All routers have a reset button. All you have to do is press the reset button for 20 seconds until all the LEDs are flashing and when done, release it. It will be reset to the default username and password, which are listed above.

Resetting the password for 192.168.0.1
Resetting the password for 192.168.0.1

If You Can’t Access 192.168.0.1

Sometimes, due to an incorrect connection or broken cable, you cannot access the home page of the router. In this case, change the cable. If you forgot your router’s username and password, you need to reset it.

If you cannot determine the user name and password, you can search for the default user names and passwords for the make and model of router or modem you own, or you can try to learn them by contacting your internet service provider. It is so easy to install and uninstall, and even it is quite easy to add and reset the password in no time. You can change the router password.

Changing Your Router’s Password

When you find the correct address, you will need to log in using the router’s management password. To find the IP address, a person can adhere to one of the following three methods. Public IP addresses are unique on the Internet, but personal addresses are not.

Now, if you want to change Router Password, then go to advanced settings, and from there, choose admin password > Change it > Save Settings, and it’s done.

The very first thing you should know is that apart from the IP address, there is a new type of identification known as the port number. If you want to see the IP address of your router, you need to perform some necessary actions. Also make sure that you are using the IP address you just found in the previous step. What you need to know is the native IP address of your Raspberry Pi.

Comment on your problem if you encounter one. Thank you for reading this article on the default login and router username and password for 192.168.0.1 router. Also share with us on social media.

Share and Enjoy !

1 thought on “192.168.0.1 Router Login Password”

Leave a Comment